Long rangeCustom parts buildStaff pick
AOS UL10 V5 ArduPilot-ready 10" Long Range (no DJI)
Community build by Lystrup Maher (@lystrupmaher)Staff · Published Oct 1, 2026
About this build
A ten-inch 6S long-range and light-lift platform built around an H743 flight controller that runs Betaflight, INAV or ArduPilot, with a Walksnail 2W digital link and a 900 MHz ELRS receiver. A good base for people who want waypoint-capable firmware or mapping experiments without any DJI parts.
Parts list from aos-rc.com, iflight-rc.eu, pyrodrone.com
Parts list
0 of 10 parts are in our catalog
| Frame | iFlight / AOS RC AOS UL10 V5 (10-inch) | Not in our catalog |
| Motors | BrotherHobby Tornado T5 Pro 3115 (1050KV (only KV listed at PyroDrone; AOS gives no KV)) × 4 | Not in our catalog |
| Flight controller | Matek H743-SLIM (V4) | Not in our catalog |
| ESC | T-Motor Cine80A 8S 4-in-1 (30x30) | Not in our catalog |
| Video transmitter | Walksnail (Caddx) Avatar GT VTX (kit with HD Pro camera) (2W, dual antenna) | Not in our catalog |
| Camera | Walksnail (Caddx) Avatar HD Pro camera (bundled) | Not in our catalog |
| Receiver | Happymodel ES900 DUAL RX (ELRS 915MHz true diversity) | Not in our catalog |
| GPS | Holybro M10 GPS (Standard) (M10 + compass) | Not in our catalog |
| Propellers | Gemfan 1050-3 Glass Fiber Nylon (10x5x3) × 4 | Not in our catalog |
| Battery | 6S Li-ion pack (e.g. 6S2P 21700, 8000-10000 mAh) | Not in our catalog |