Starting from scratch?
Answer four questions and we’ll pick a complete build that fits together. You can change any part afterwards here in the composer.
Start from a recommendation
Curated builds to fork:SpeedyBee Master 5 V2 Analog (TX800, ELRS)5" Walksnail Freestyle Build (Joshua Bardwell freestyle picks)GEPRC Cinebot25 S HD O3 (ELRS)iFlight Chimera7 Pro V2 Analog (6S, GPS, ELRS)5" HDZero Race Build (Joshua Bardwell racing picks)Oscar Liang Budget 5" Analog Build (~$230)AOS UL10 V5 ArduPilot-ready 10" Long Range (no DJI)Holybro Kopis Cinematic X8 7" ARF KitiFlight Nazgul Evoque F5D V2 O4 Pro (6S, ELRS)Shendrones Squirt V2 3" Cinewhoop (Bardwell / Ciotti list)
Build a drone
Choose a part for each slot. We check fit, weight and cost as you go.
Parts
0 of 7 required parts chosen
Airframe and flight
Frame
Holds every other part and sets the prop size and stack mounts.
Flight controller
Runs stabilization and talks to the receiver, GPS, and video. An all-in-one board also drives the motors.
ESC
Drives the motors from battery power.
Motors
One per arm.
Video
Video transmitter
Sends the camera feed to the pilot.
Camera
The pilot's forward view.
Radio control and GPS
Receiver
The control link from the pilot's radio.
GPS
Position hold and return to home.
Battery and propellers
Propellers
One per motor.
Battery
Main flight battery.
Regulatory
Remote ID
Broadcasts identification and location when FAA rules require it.