FreestyleCustom parts build
Oscar Liang 5" Analog Freestyle Build Tutorial
Community build by Lystrup Maher (@lystrupmaher)Staff · Published Oct 1, 2026
About this build
A classic 6S analog 5-inch on the open-source TBS Source One V5 frame, following Oscar Liang's analog build tutorial. It is a sensible, inexpensive way to learn soldering and Betaflight setup, and analog video keeps latency low and parts cheap to replace.
Parts list from oscarliang.com
Parts list
1 of 10 parts are in our catalog
| Frame | TBS Source One V5 (5-inch) | Not in our catalog |
| Motors | iFlight Xing2 2207 (1855KV) × 4 | Not in our catalog |
| Flight controller | SpeedyBee F405 V3 (30x30) | Not in our catalog |
| ESC | SpeedyBee BLS 50A 4in1 | Not in our catalog |
| Video transmitter | SpeedyBee TX800 (5.8GHz analog) | Not in our catalog |
| Camera | Caddx Ratel 2 (micro) | Not in our catalog |
| Receiver | RadioMaster RP1 V2 ExpressLRS 2.4GHz Receiver | Out of stock |
| Propellers | HQProp 5x4.3x3 V2S (5.0x4.3x3) × 4 | Not in our catalog |
| Battery | 6S LiPo (6S 1000-1300mAh (1100mAh used)) | Not in our catalog |
| Other parts | Capacitor + battery strap (1500uF (included with stack), 20x220mm strap) | Not in our catalog |